Installation instructions, Flush the line a – Santec 3150VF-TM User Manual
Page 3
Advertising
PAGE 03
HOT WATER
SUPPLY
COLD WATER
SUPPLY
Cold Valve
Hot Valve
Santec Inc.
3501 Challenger Street, Torrance, CA 90503
Tel: (310) 542-0063 Fax (310) 542-5681
www.santecfaucet.com
07/04
INSTALLATION INSTRUCTIONS
3.
FLUSH THE LINE
A
- After all the connections have been made, remove the aerator housing (4)
basket (3) and washer (2).
- Turn on the water on both hot and cold sides and flush the lines for 45 seconds.
- Turn off the water and reinsert the washer (2), basket (3) and Housing (4).
- Turn on the water and check for leakages at all joints. If water leaks from any of
the connections tighten the connection until the leakage stops.
3150VF _ _-TM
A
Advertising