Santec 4332GL - Manual (Page 3)

TRIM INSTALLATION
TRIM PLATE
- Place foam strip around the inner edge of the shower plate.
- Press the shower plate against the wall.
- Screw the 2 plate screws through the plate holes and onto the valve’s
screw holes. Tighten both screws firmly.
HANDLE
- Insert the Handle onto the Valve Stem. Turn the handle clockwise
until it reaches the end. Reposition the handle to the desired
position. The handle should be facing up at 12 o’clock position.
- Insert the Handle Screw onto the Handle and screw it onto the
valve. Tighten it firmly.
- Screw the handle cap onto the handle.
INSTALLATION INSTRUCTIONS
PAGE 03
TRIM PLATE
FINISHED WALL
PLATE SCREWS
TRIM PLATE
HANDLE
HANDLE
SCREW CAP
Santec Inc.
3501 Challenger Street, Torrance, CA 90503
Tel: (310) 542-0063 Fax (310) 542-5681
www.santecfaucet.com
08/07
4332GL _ _- TM
COLD
WARM
WARMER
HOT
Off
Cold
Hot
SANTEC