Santec 4350GL-TM - Manual (Page 3)

PAGE 03
HOT WATER
SUPPLY
COLD WATER
SUPPLY
Cold Valve Hot Valve
Santec Inc.
3501 Challenger Street, Torrance, CA 90503
Tel: (310) 542-0063 Fax (310) 542-5681
www.santecfaucet.com
07/04
INSTALLATION INSTRUCTIONS
3.
FLUSH THE LINE
A
- After all the connections have been made, remove the aerator housing (5)
basket (4) and washer (3).
- Turn on the water on both hot and cold sides and flush the lines for 45 seconds.
- Turn off the water and reinsert the washer (3), basket (4) and Housing (5).
- Turn on the water and check for leakages at all joints. If water leaks from any of
the connections tighten the connection until the leakage stops.
4350GL _ _-TM
A