Santec 9520KT - Manual (Page 3)

*Illustration may not depict actual products 0 3
9520KL, KR, KT _ _
S p o u t
Remove tee connector and spout mounting hardware from spout.
Apply a ring of silicone caulking around hole designated for spout. Do
supply lines.
Hole size for the spout and handle trim is a minimum of 1-1/4” and a
maximum of 1-1/2”.
From the top of the sink or counter, insert the spout’s threaded shank
the sink top.
C o u n t e r s u r f a c e
Spout Installation (1)