Santec 9565KT - Manual (Page 3)

0 3
P A P E R H O L D E R
Mark the four screw hole positions by using the Mounting Hardware
Post.
Using a drill, pre-drill holes for the toggles.
Fold the Toggle’s leg and insert it into the wall.
The Mounting Hardware Posts can be secured by screwing the Screws
into the Toggles.
For wooden surface, the Mounting Hardware Posts can be secured by
screwing the screws directly into the wall.
Installing On Dr ywall
Installing On Wooden Surface
9565KL, KR, KT _ _