Centro 6800 - Manual (Page 13)

#1 - ¼” x 38mm Screw (x1)
#2 - ¼” x 16mm Screw (x4)
#4 - ø7 Lock Washer (x5)
#5 - ø7 Washer (x5)
12a. Remove the hardware that is pre-assembled to the side
burner valve bracket (CC), as shown in figure A. Insert
the side burner valve stem through the rear of the left
side shelf fascia (DB). Assemble the side burner valve to
the side shelf fascia, using the hardware removed.
12b. Assemble the Side burner control knob (#13) to the
side burner valve (CC).
*
B
11
12
TIP: To position the left side shelf, insert the two hooks
on the side shelf assembly into the two openings
located on the upper left side panel (BB).
11. Assemble the right side shelf assembly to the cart
assembly, as shown in figure B.
ASSEMBLY INSTRUCTIONS
11
#13. Knob (x1)
CC
DA
DB
13
DA
BB
A
A
B
*