Santec TH_Assembly User Manual
Santec Accessories for water
THERMOSTATIC VALVE EXTENSION ASSEMBLY
1
Valve body for assembly.
Take out temperature dial regulator.
Valve assembly without regulator.
Mark Thermostatic extension with a marker. Align
mark on the valve stem with mark on the brass
body & mark on the extension you just made.
Aligning these three marks in a straight line and push
thermostatic extension (Shining in the picture) on the
valve stem.
Put on the regulator matching the mark on the
extension body. Here mark (Red) on the adapter
matches with the mark on the thermostatic extension
and mark on the brass body.
See, all marks are aligned in a straight line.
Put on the thermostatic plate.
Now Put on the Thermostatic dial. Red button should
be aligned with the mark on the thermostatic extension.