Rear view connections – Sceptre X270PV-FHD User Manual
Page 12
- 12 -
www.SCEPTRE.com
SCEPTRE 24” LCD/LED HDTV User Manual
Rear View Connections
1.
AC – This connection is for providing electricity to the TV.
2.
TV – This connection is for digital or analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check
http://www.antennaweb.org
.
3.
HEADPHONE – This connection is for headphones to be attached to the TV.
4.
LR – These two connections are audio connection for YPbPr, S-Video, or AV
port.
5.
AV – Video connects to devices that use composite video cables such as
VCR or DVD player or Wii™. Please Note: audio is shared with YPbPr,
and S-Video port.
6.
S-VIDEO – S-Video connects to devices such as SVCR or camcorder or
video game consoles. Please Note: audio is shared with YPbPr, and AV
port.
7.
YPbPr – This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. Please Note: audio is shared with S-
Video, and AV port.
8.
VGA - This connection port connects to a PC for video using VGA cable. Be
sure to connect your audio cable to the VGA Stereo input if you want sound
out of VGA video source.
9.
Audio In - This connection port is for people who want to provide audio to the
TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack
audio cable.
10. HDMI2 – HDMI connects to devices that use HDMI cable, such as Blu-ray or
HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video.
11. HDM1 – Refer to HDMI1
12. USB – USB connects to USB flash drives for playing music and picture. The
USB port is also used for updating the TV’s firmware.
Please Note:
•
This TV features a power saving function which will turn off the TV
automatically after 5 minutes of idling on a connection with no signal.
This feature is present on all connection.