Sceptre X405BV-FHD - Manual (Page 28)

- 28 -
www.SCEPTRE.com
SCEPTRE X405 HDTV User Manual
i. AUTO ADJUST
– This feature automatically adjusts the
picture syncing in with the signal of the PC.
ii. HORIZONTAL POSITION
– This feature adjusts the to
the left or right position of the PC picture.
iii. VERTICAL POSITION
– This feature adjusts the up or
down position of the PC picture.
iv. CLOCK – This tunes in large increments the picture
quality of the PC picture.
v. PHASE – This tunes in small increments the picture
quality of the PC.
vi. RESET – This resets the settings of PC settings.
IV. COLOR TEMPERATURE – This feature adjusts the color temperature
of the TV, giving warm, normal, cool, (warm being more red, cool being
more blue and normal being neutral color).
V. ADVANCE PICTURE SETTINGS
i. DYNAMIC CONTRAST
– This feature allows the TV to
automatically adjust the contrast of the TV depending on
the picture you are viewing.
ii. FILM MODE – This feature is 24p that syncs with DVD
movies, and should be enabled when viewing DVD video
to allow smoother frame rate.
iii. NOISE REDUCTION
– This feature reduces general
pixilation by blurring them.
iv. MPEG NOISE REDUCTION – This feature reduces DVD
video pixilation by blurring them.
Please Note:

The OSD shows a button called ENTER (labeled ENTER:Press to Execute).
The ENTER button refers to the

button on the remote control.
 If you use POWER SAVING as your picture mode, the screen’s color,
and brightness will be significantly reduced.