Sceptre X20WG-1080P - Manual (Page 19)

SCEPTRE X20 Page19
Connecting the LCD to Your PC
If You Have DVI Connection on Your Video Card…
1. Make sure the power of X20 LCD MONITOR is turned off.
2. Obtain a DVI cable and connect to the DVI connection on your
PC. Connect the other end of the cable to your X20 LCD
MONITOR.
3. Turn on the power of both the X20 LCD MONITOR and the PC.
Please Note :
• Some video cards may have their DVI connection turned
off by default. If you do not get video, please consult your
video card’s technical support.
• The PC’s clearest picture is produced under 1680x1050
at 60Hz.