Sceptre X22WG-GAMER - Manual (Page 31)

SCEPTRE X22 Page31
VGA-PC input
When VGA-PC is selected, the following OSD menu will be displayed when the MENU
button is pressed.
1. GEOMETRY
AUTO
Auto fine tunes picture clock and position.
H-POSITION
Adjusts the display position left or right. Normally use Auto Adjust.
V-POSITION
Adjusts the display position up or down. Normally use Auto Adjust.
CLOCK
Adjusts the clock frequency to match video card. Normally use Auto
Adjust.
PHASE
Adjusts the phase frequency to match video card. Normally use Auto
Adjust.
RECALL
Resets the parameters to original factory settings.