Sceptre E195BD-SHD+ - Manual (Page 18)

- 18 -
www.SCEPTRE.com
SCEPTRE E195BD-SHD HDTV User Manual
Connecting Connecting Connecting Connecting Wii™ Wii™ Wii™ Wii™ with Composite… with Composite… with Composite… with Composite…
1. Make sure the power of HDTV and your Wii™ is turned off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to both
your Wii™ and AV’s Yellow Video connector port on the back side of your
HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both your
Wii™ and AV’s white connector port on the back side of your HDTV.
4. Connect the red color connector to both your Wii™ and AV’s red connector
port on the back side of your HDTV.
5. Turn on the HDTV and your Wii™.
6. Use the remote control’s source button or the source button on the HDTV to
switch to AV.
Please Note :
•
Make sure to read your Wii™ installation guide for further
information.
• If you are using this current connection then the YPbPr
connection will not have audio because the red and white
audio connection is shared with this port.