Sceptre E325LD-HDR - Manual (Page 8)

- 8 -
www.SCEPTRE.com
SCEPTRE E325 User Manual
Attaching or Removing the Stand
1. To attach the stand place the display unit flat on a table. Afterwards attach the neck piece
onto the display and screw in the 4 fine threaded screws to secure the neck.
2.
Attach the plastic base onto the neck by form fitting the circular hole. Remember the plastic
base should have more area facing the front of the neck. Fit the metal plate onto the bottom of
the base by matching the 3 holes. Screw in the 4 thick threaded screws to secure the metal
plate to the plastic base. The stand installation is now complete.
3. To remove the stand, remove the 4 screws indicated in the picture and the stand will come off.