Sceptre P322BV-HDR - Manual (Page 8)

- 8 -
www.SCEPTRE.com
SCEPTRE X322BV-HDR User Manual
Attaching or Removing the Stand
1. To attach the stand place the display unit flat on a table. Afterwards
attach the neck piece onto the display and screw in the 4 fine threaded
screws to secure the neck.
2. Attach the plastic base onto the neck by form fitting the circular hole.
Remember the plastic base should have more area facing the front of the
neck. Fit the metal plate onto the bottom of the base by matching the 3
holes. Screw in the 4 thick threaded screws to secure the metal plate to
the plastic base. The stand installation is now complete.