Sceptre X23GV-KOMODO - Manual (Page 34)

SCEPTRE X23 HDTV User Manual
- 34 -
www.SCEPTRE.com
If You Want the Better Connection with Component…
1. Make sure the power of X23 LCD HDTV and your set-top box is turned
off.
2. Obtain a Component Cable. Connect the green color connector to both
your set-
top box and Component 1’s green connector port off the back of
your X23 LCD HDTV.
3. Connect the blue color connector to both your set-top box and
Component 1’s blue connector port off the back of your X23 LCD HDTV.
4. Connect the red color connector to both your set-top box and
Component 1’s red connector port off the back of your X23 LCD HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both
your set-
top box and Component 1’s white connector port off the back of
your X23 LCD HDTV to the right side of your green, blue, red component
connection.
6. Connect the red color connector to both your set-top box and
Component 1’s red connector port off the back of your X23 LCD HDTV to
the right side of your green, blue, red component connection.
7. Turn on the X23 LCD HDTV and your set-top box.
8. Use the remote contro
l’s source button or the source button on the right
side of the TV to switch to YPbPr1.
Please Note :

If Component 1 is already occupied, please use Component 2 as
your connection port and switch to source YPbPr2.