SeaLand 8800 Series MasterFlush - RV Installation Appendix User Manual
Rv installation appendix, 8800 series masterflush, Macerator toilets
wiring / electronic control Module connections
WARNING! HAZARD OF
SHOCK OR FIRE – Always
use recommended fuse, circuit
breaker and wire size. Failure to do
so can result in fire that can cause
the loss of property and life.
IMPORTANT INSTALLATION NOTES
• Each toilet must have its own medium-delay circuit
breaker or fuse.
• Wire sizes must be appropriate for the installation. All
other installation factors must be in accordance with
ISO electrical standards.
• Always use stranded copper wire (preferably tinned).
• Always use crimp-type wire connections. Do not use
wire nuts (they corrode).
CONvERSION TAbLES
Wire – AWG to mm
2
Feet to Meters
AWG
14
12
10
Ft
10
15
20
30
50
mm
2
2.5
4.0
6.0
M
3.1
4.6
6.1
9.2
15.2
Wire size per length of run*
0-15 ft.
16-30 ft.
31-50 ft.
12 volts DC
#14
#12
#10
* Distance from circuit breaker to electronic control module.
WIRE SIZING CHART
® Registered; ™ Trademark of Dometic Corporation
Dometic Corporation
600345328 5/08
When installing a SeaLand macerator toilet in a recreation vehicle, please use the following
Wiring information. Refer to SeaLand 8800 series owner’s manual (600345326), page 10,
for complete SeaLand macerator toilet wiring diagram.
8800 series MAsTerFlush
™
MACerATOr TOileTs
rV iNsTAllATiON APPeNDiX