Seville Classics SHE16473ZB - Manual (Page 2)

Please make sure you have all the parts before assembly
A 4 pcs B 4 pcs C 4 pcs D 28 pairs
Top Poles Bottom Poles Screw Connectors Slip-Sleeves
Plastic cap (top)
Threaded end (bottom)
E 7 pcs F 8 pcs G 8 pcs H 8 pcs
Shelves Leveling Feet Retaining Rods Clips
I 4 pcs J 4 pcs K 4 pairs
Threaded Inserts Plastic Caps Pole Clamps
To Assemble One Unit:
Step 1:
Screw the Top Poles (A) and Bottom
Poles (B) together using the Screw
Connectors (C).
Step 2:
Screw the Leveling Feet (F) into the
bottom poles.
Step 3:
Starting from the bottom, fasten a pair of
Slip-Sleeves (D) around the groove of each
pole.
Note: The poles have double grooves every
5 inches for easy measurement and
assembly.
Step 4:
Slide a Shelf (E) over the top of the 4 poles
until it rests snugly over the slip-sleeves.
TIP: If necessary, use a rubber mallet to
further secure the shelf.
Step 5:
Repeat Step 4 by fastening more slip
sleeves on the poles and sliding the shelves
through the poles to fit tightly on the sleeves
for the remaining shelves.
Step 6:
Install Retaining Rods (G) using Clips (H)
as shown in the photo on the left.