Seville Classics UHD20206B - Manual (Page 4)

ASSEMBLY INSTRUCTIONS
(pg 3 of 5)
Step 1:
Step 2:
Step 3:
Step 4:
shown, making sure that the screw holes for the
bottom crossbar face toward the front of the
work bench.
*NOTE: We recommend using TWO people to assemble the work bench.
Open color box and remove the parts that are
on top of the inner carboard box.
Place the two top crossbar (#2) on the wood
Slide the leg pieces (#5) into the top crossbars as
mind that the screw holes for the legs must
face the inside of the board. Do not scew these
pieces in yet, as this should be left until all of
and expose the screw holes of the wood
board
Unfold the inner box. Remove the Styrofoam
the pieces are in place.
board and line up the screw holes, keeping in