Sevylor Fiji Travel Pack Kayak - Manual (Page 4)

INFLATABLE CANOES & KA
YAKS
4
®
IMPORTANT! Inflate the product chambers in the following order:
1. Inflate the floor chamber(s).
2. Inflate the outside main chamber(s).
The chambers on the product will also be numbered to indicate
order of inflation. This order of inflation will ensure the proper volume
and buoyancy of the safety chamber.
Note: To inflate the mini Double Lock™ valve, which is used on
some of the Sevylor
® product floors and seat bottoms, follow the
same inflation instructions above or previous instructions, using the
mini Double Lock™ valve adapter. The mini Double Lock™ valve
adapter is included with all Sevylor
® pumps. The adapter can be
purchased from Sevylor Customer Service by calling
1-800-835-3278 (Part Number 5010000707).
Water temperature and weather does affect the pressure in
inflatable products. In cold weather your product will lose some
pressure due to the fact the air will contract. If this occurs, you
may want to add a little air to improve your products performance.
However, in hot weather, the air will expand. You must let some air
out to prevent your product from failing due to overpressure. You
should avoid exposing your product to extreme temperatures
(hot or cold).
CAUTION!
DEFLATION INSTRUCTIONS
Deflation instructions using any
Sevylor
® QuickPump™ unit:
Deflation instructions using the
Sevylor
® Dual Action Hand Pump:
Remove adapter hose from inflation end and
attach to opposite deflation end of pump.
Repeat same steps as inflation. This will draw
the air out quickly. Remove adapter hose from inflation port and
attach to deflation port. Repeat same steps as
inflation. This will draw the air out quickly.