SIG SAUER P229 - Manual (Page 85)

www.sigsauer.com 85
Appendix C: SRT Supplemental Instructions
Thank you for purchasing our new Elite Series pistol with Short Reset Trigger (SRT)
System. Please be advised that there is an additional step in field stripping your
pistol equipped with an SRT system. Disregard procedure 8.1, steps 5 and 6 and
follow the steps listed below:
• Pull back the slide slightly to disengage the slide catch lever. Hold the slide
firmly and allow it to move forward slowly.
• As the slide reaches its closed position, decock the pistol. This will allow the
SRT safety lever to completely retract so the slide can be fully removed from the
frame.
• Now slip the complete assembly (comprised of slide, barrel, recoil spring and
guide rod) forward and off the frame.
Should you need any further support in disassembling your SRT equipped pistol,
please call our Customer Service Department at (603) 610-3000 ext 3.
13SIG781_Classicmini_manual_8501154REV01.indd 85 6/19/13 1:08 PM