SIG SAUER P232 - Manual (Page 34)

P232 Operators Manual 32 OM-P232-USA VER 07.10.01
3. Clean exterior surfaces of the barrel with a brush coated with
gun oil.
4. Remove dirt from guides of the frame (15), inside and outside
of slide (4) and recoil spring (3) with a brush or cleaning patch.
Lightly lubricate same surfaces with a cloth impregnated with gun
oil or gun grease.
5. Lightly oil bores of the barrel and chamber. Remove any
excess lubricant.
CAUTION: Avoid over lubrication of components.
OM-P232-USA 07-10-01.qxp 2/13/2008 9:55 AM Page 32