SIG SAUER P522 Pistol - Manual (Page 22)

42 www.sigsauer.com www.sigsauer.com 43
when it counts ™
waRning
if your pistol stops firing with a live round in the chamber of a hot barrel (a misfire or jam),
remove the round immediately. if you cannot remove the round within 10 seconds, remove
the magazine and wait at least 15 minutes with the pistol pointing in a safe direction. This
way, neither the user nor any other person would be injured by the possibility of a round
“cooking-off” (a round detonating due to the heat of the barrel). Keep your face away from
the ejection port while clearing a hot chamber.
6.2 minimizing malfunctions (“Jams”)
Malfunctions can largely be avoided by cleaning the pistol (see section 8.3 “cleaning the
Pistol”).
• after each firing session
• Whenever a buildup of firing residue is suspected
• Whenever the pistol is exposed to extreme environmental conditions (rain, snow, freezing
temperatures, etc.)
7.0 disassembly
1. unload pistol (see section 5.0) – visually and physically check to ensure the pistol is clear
of all ammunition;
2. ensure the bolt is forward;
3. retract the front and rear takedown pins – the pins are captive and will not fully remove;
4. Separate the trigger casing from the receiver;
5. Pull the charging handle fully to the rear, exposing the recoil spring assembly;
6. Pull the charging handle outward and remove from the bolt;
Step 4
Step 3
Step 6