SIG SAUER SIGM400 Rifle - Manual (Page 57)

when it counts ™
www.sigsauer.com 57
7.2. Extractor Removal
1. Apply slight pressure to the rear of the extractor with the thumb.
2. Using a punch, or the tip of the firing pin, push out the extractor pin. from either side.
3. Remove the extractor from the bolt.
FIG 29 BOLT WITH EXTRACTOR REMOVED
NOTE: Only separate the extractor spring from the extractor when replacement is necessary
Retaining Pin
Extractor
11SIG455_M400MiniManual.indd 57 8/2/11 3:58 PM