Compaq 3200 - Manual (Page 108)

6-26 Installing the Operating System Drivers
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Getting the Driver and
Installation Information
The latest drivers and support files for SCO OpenServer 5 and information
about installing the driver are on the Compaq SmartStart and Support Software
CD supplied with the Smart Array 3200 Controller option kit. To access these
files, create a set of Compaq EFS for OpenServer 5 diskettes from the Compaq
SmartStart and Support Software CD.
Materials Needed
To create a set of Compaq EFS for OpenServer 5 diskettes, you will need:
■ Compaq SmartStart and Support Software CD (supplied in the Smart Array
3200 Controller option kit)
■ Blank diskettes
■ Access to a server or workstation with a bootable CD-ROM drive. This may
be the system in which you are installing the Smart Array 3200 Controller.
Creating the EFS Diskettes
To create the EFS for SCO OpenServer 5 diskettes:
1. Boot the server from the Compaq SmartStart and Support Software CD.
2. From the Compaq System Utilities screen, select Create Support Software.
3. From the Diskette Builder screen, select Create Support Software
Diskettes from CD only.
4. Scroll down the list and select Compaq SCO OpenServer 5.0 EFS (for
SCO OpenServer 5).
5. Follow the instructions on the screen to create and label the diskettes.
6. At the SCO Products screen, select SCO Installation Notes for Compaq
Servers.
7. Follow the instructions on the screen to create and label the diskettes.