Windows device driver configuration – Solvline MultiModem User Manual
Page 16
Advertising
16
Windows Device Driver Configuration
Windows Device Driver Configuration
This procedure is not needed for versions after VA2, since they have hardware settings
1.
Invoke the “Device Manager,” select the “SystemBase Multi-4/PCI” (or SystemBase
Multi-4MP/Multi-2MP) and right-button-
click. Then, select the “Properties.”
2.
Select the “Settings” tab, and click “All Port Remap…” button.
3. Select the COM Port name of first port of the Multi-Modem. The port names will be
arranged with this name. You may use those port names without system reboot.
4. The O/S may ask the modem driver again after port name remapping. If that occurs,
set the location of the modem driver as below:
Advertising