Solvline CS-CAN Command Manual - Manual (Page 14)

14
Programming Guide
3.2 How to set configuration for the CAN communication
environment.
Order Command Description
Summary
Step 1. MO<CR> Send VA<CR> command to CS-CAN and check the current
mode in CS-CAN. If returned syntax is OK0<CR>, then the
mode is in Configuration mode, but if it is OK1<CR>, then it is
in Active mode. If the mode is Configuration mode in CS-
CAN, please move to Step 3, but if the mode is Active Mode,
then proceed to Step 2.
Check for current
mode used in CS-
CAN
Step 2 +++<CR> Send +++<CR> command to CS-CAN to change the mode to
Configuration mode. Modify
Configuration mode
Step 3 WC(BS)<CR> Send WC command to CS-CAN and modify the serial
communication environment settings in CS-CAN. Modify serial
communication
environment
Step 4 SV<CR> Send SV<CR> command to CS-CAN and save the
configuration in CS-CAN. Save settings
Step 5 SR++<CR> Reboot CS-CAN by sending SR<CR> command to CS-CAN.
Reboot CS-CAN