Pairing (serial line to serial line) – Solvline SG-1160 User Manual
Page 60
Advertising
SerialGate User Guide
60
Pairing (Serial Line to Serial Line)
This is mainly used when the cable length between the PC and a serial device is short so a user needs
to extend the communication distance. This approach consists of two SerialGates connected in pair.
Setting for SerialGate 1
In order to perform master features, change operation mode to Pari_Master. Check the communication
speed of a PC and set it in
“Com Options”, and also register the target SerialGate IP address and port
number in Remote IP/Port.
Advertising