Solvline SG-2xxx Series - Manual (Page 25)

SerialGate User Guide
25
Exterior of SG-2081 Series
SG-2081DIL/ALL, 232 Top SG-2081RIL/ALL, 232 top
SG-2081DIL/ALL, 232 Front SG-2081RIL/ALL, 232 Front
SG-2041DIL/ALL, 232 Rear SG-2041RIL/ALL, 232 Rear

Serial: DB-9 male (DE-09P) or RJ-45 socket for serial ports

DC-Jack power connector: for connection of 12~48VDC adapter cable
When the power is supplied from the both terminal block and DC adapter connector
at the same time, it may cause irreparable damage to the product.

Terminal block power connector: for connection of 12~48VDC terminal block cable
When the power is supplied from the both terminal block and DC adapter connector
at the same time, it may cause irreparable damage to the product.

Reset: SerialGate reboots if this button is pressed for less than 3 seconds. If pressed for
longer than 3 seconds, SerialGate will restore factory default settings.

LED: Operation status of SerialGate. Next section describes the meaning of each LED
display status.

WAN: Main network port used when connecting SerialGate to networking devices such a
s Ethernet card, hub, and router.