View commands 36, Network commands 36 – Solvline PB30xx+ User Manual
Page 36
Portbase User Guide
36
2. View commands
z set view [ all / nw / serial / admin ]
-
set view all : View all current settings.
-
set view nw : View current network settings.
-
set view serial : View current serial port settings.
-
set view admin : View current admin settings.
3. Network commands
Configure general network environment and network management.
z set nw [ mode / ip / subnet / gateway / dns / nms ] <var … >
[ Network Configuration ]
-
set nw mode [ static / dhcp ] (Default: static )
IP obtaining method for Portbase’s network connection
-
set nw ip <IP Address> (Default:
192.168.1.71)
Set the current IP address Portbase is assigned to.
When line type is Static IP, manually enter an appropriate IP address.
When line type is DHCP, it is not editable.
-
set nw subnet <Subnet mask>
(Default: 255.255.255.0)
Set the subnet mask Portbase is assigned to.
When line type is Static IP, manually enter an appropriate subnet mask.
When line type is DHCP, it is not editable.
-
set nw gateway <Gateway address> (Default:
192.168.1.1)
Set the default gateway Portbase is assigned to.
When line type is Static IP, manually enter an appropriate gateway.
When line type is DHCP, it is not editable.
-
set nw dns<DNS address>
Set the DNS address of Portbase.