Sonics 2055 -Press - Manual (Page 14)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
I N S T R U C T I O N M A N U A L • M O D E L 2 0 5 0 / 2 0 5 5
13
2. SPEED CONTROLS
The velocity at which the horn descends and returns can be adjusted via
the two small threaded screws located at the top of the press as shown
below. These controls are factory adjusted for average operating con-
ditions. If a minor adjustment is necessary, adjust in small degrees.
Turn the Descend Speed Control screw clockwise to slow the descend
speed, counterclockwise to increase the speed. Turn the Return Speed
Control screw clockwise to slow the return speed, counterclockwise to
increase speed.
Excessive velocity may be
unnecessary and harmful
to the system.
DESCEND
SPEED
CONTROL
RETURN
SPEED
CONTROL
Go To Top Of Document