Soundmatters foxL DASH Manual - Manual (Page 4)

Oper Oper Oper Oper Operation Mode ation Mode ation Mode ation Mode ation Mode L LL LLE E E E ED Color D Color D Color D Color D Color
The LED flashes Blue for Bluetooth mode, White for Audio In (Wired)
Normal Operation Blue or White On (2 sec) / Off (3 sec)
Battery Charging Operation Blue or White On (2 sec) / Red (3 sec)
Battery Charging Complete Blue or White On (2sec) / Green (3sec)
Low Battery Red (2 sec) / Off (3 sec)
Bluetooth Pairing Mode Blue (0.5 sec) / Yellow (0.5 sec)
Phone Ringing Mode Blue (0.5 sec) / White (0.5 sec)
Phone Call Active Mode Blue (2 sec) / Off (2 sec)
Bluetooth On, Not Connected Blue (1 sec) / Off (1 sec)
Specifications Specifications Specifications Specifications Specifications
Battery Life:
up to 12 hours (Bluetooth Off, 76dB @0.5m)
Power: 2W x 2 < 10%THD, 3.6V in
Output Level: 92dB @ 0.5m 3.6V
AC Adapter: Not included. Designed for use with 5V 500mA
USB standard AC Adapters and computer USB ports
Dimensions: 0.62”x 2.1” x 7.5”
(16mm x 53mm x 190mm)
Weight: 6.9 oz (196 grams)
soundmatters® believes in a policy of continuous product improvement, therefore specifications are subject to change
without prior notice.
R R R R Rechar echar echar echar echarging the internal battery ging the internal battery ging the internal battery ging the internal battery ging the internal battery
To charge, use the supplied usb cable with your computer or a standard usb ac charger.
T T T T Trrrrroubleshooting oubleshooting oubleshooting oubleshooting oubleshooting
1. Sound distor Sound distor Sound distor Sound distor Sound distortion tion tion tion tion
a. If the LED is blinking red, the battery is low; connect to the power adapter .
b. Power off, then on.
c. Lower volume.
2. Not enough output with y
Not enough output with y Not enough output with y Not enough output with y Not enough output with your fo our fo our fo our fo our foxL xL xL xL xL D D D D DA A A A AS S S S SH a v H a v H a v H a v H a volume all the way up olume all the way up olume all the way up olume all the way up olume all the way up
a. Turn up the volume on the music player, or place the foxL DASH a near a wall or in a corner.
b. Move closer to the foxL DASH a or to a quieter listening area.
3. Signal loss or dr
Signal loss or dr Signal loss or dr Signal loss or dr Signal loss or dropouts via Bluetooth opouts via Bluetooth opouts via Bluetooth opouts via Bluetooth opouts via Bluetooth
a. Occasional signal dropouts are normal for Bluetooth.
b. Obstructions like walls or people reduce the range of Bluetooth, move closer.
4. Unable to pair with Bluetooth
Unable to pair with Bluetooth Unable to pair with Bluetooth Unable to pair with Bluetooth Unable to pair with Bluetooth
a. Confirm your device is Stereo Bluetooth 2.0 A2DP compatible.
b. Confirm that your foxL DASH a isn’t already connected with another product (i.e. if you’re trying to
connect to your phone, make sure a previously connected tablet is disconnected or turned off ). Or
“force pair.”
c. If your foxL DASH a Bluetooth memory is full, clear the pairing memory by pressing the reset
button using the end of a small paperclip.
5. No function
No function No function No function No function
a. Lock-up – Press the reset button using the end of a small paperclip.