Canon IMAGEPRESS C6010VPS - Manual (Page 30)

27
1
2
3
4
5
6
7
5 Periodic Inspection of the Breaker
This machine has a breaker that detects excess current or leakage current. Make sure to test the
breaker once or twice a month using the following procedure.
IMPORTANT
If a malfunction occurs after an inspection, contact your local authorized dealer.
Checking the Breaker
1
Turn OFF the main power.
For instructions on turning the main power OFF, see User manual - Operating Information.
2
Push the test button.
IMPORTANT
Briefly push the test button.
NOTE
• The breaker is located on the back of the marking engine.
• For more information on the location of the breaker, see User manual - Operating Information.
3
Confirm that the breaker dial is in the OFF (" " side) position.
Reset Button
Test Button