Speeco 24045000 User Manual
Page 5
Page 3
LOCATION: TOP END OF AUGER TUBE
PART NUMBER: DL52020500
NOTE: IF THE OUTPUT SHAFT GUARD MENTIONED IN THE ABOVE DECAL IS MISSING ,YOU
MAY ORDER A REPLACEMENT BY CALLING US AT 1-800-525-8322.
GENERAL SAFETY AND PREPARATION
ALWAYS make sure that anyone else who operates this post hole digger has read and understood the contents of the
owner’s manual and all safety decals on the product.
ALWAYS be certain that all members of the work party are familiar with the operation of the digger and the hazards
associated with it.
ALWAYS check with authorities for underground utilities before digging a hole. Serious injury or death could result from
contact with gas or electric lines.
ALWAYS check the tractor owner’s manual for instructions on operation, attachment of 3-point equipment and safety.
ALWAYS make sure that all safety shields are in place and tightened down. Do not operate this post hole digger if any
shields are missing. Contact SpeeCo, Inc. at 1-800-525-8322 for replacement part(s).
ALWAYS make sure that the auger point and cutting edges are intact and in good working order before using this digger.
NEVER allow children or other persons to ride on the Tractor or Implement. Falling off can result in serious injury or death.
NEVER allow children to play on or around Tractor or Implement. Children can slip or fall off the Equipment and be injured
or killed. Children can cuase the Implement to shift or fall crushing themselves or others.
NEVER allow others within 20 feet while operating the post hole digger.
NEVER operate post hole digger without all guards in place.
ALWAYS ensure the driveline is securely locked onto the PTO.