Sportline 1060 DUO (Womens) User Manual

Page 17

Advertising

Duo 1060 Speed and Distance Heart Rate Monitor

SETTING HEART RATE TARGET ZONES
The Sportline Duo 1060 automatically calculates your Maximum Heart Rate from your
User Profile and uses this information to display Heart Rate Zones.

NOTE: This information must be programmed prior to selecting Target Zone. See page 12.

In Heart Rate mode,

PRESS & HOLD

the

MODE

key until SETTING appears in the

upper line of the display to enter the Programming Sequence.

NOTE:

The watch will automatically scroll through Distance, Fitness, History and Setting.

Select Target Zone (Active, FatBurn, Endurance or MyZone=User Defined) by

PRESSING

the

START/STOP (S/S)

or Lap/view

(L/V).

Set Target Zone by

PRESSING

MODE.

Select Zone Alarms (Above Zone and Below Zone) ON or OFF by

PRESSING S/S

L/V.

Set Zone Alarms by

PRESSING MODE.

NOTE: Zone Alarm is an audible signal that sounds when you are above or below your selected Target Heart Rate Zone.

Adjust MyZone Lower Limit by

PRESSING S/S

L/V.

Set by

PRESSING MODE.

Adjust MyZone Upper Limit by

PRESSING S/S

L/V.

Set by

PRESSING MODE.

Adjust FITNESS Interval in minutes (see “Fitness/Recovery Tracker” on page 22) by

PRESSING S/S

L/V.

Set by

PRESSING MODE.

Adjust Pedometer Sensitivity Level (SENSE) by

PRESSING S/S

L/V.

Set by

PRESSING MODE.

Adjust Sleep Time (if no activity, the watch will automatically deactivate pedometer)

PRESSING S/S

L/V.

Set by

PRESSING MODE.

PRESS & HOLD MODE

to exit the Programming Sequence.

SETTING THE WATCH FUNCTIONS

ADJUST: S/S

or L/V

SET: MODE

SP5296IS01ROD.indd Sec1:14

9/13/10 11:26 AM

Advertising