StarTech.com USB32DVIPRO - Manual (Page 6)

Instruction Manual
3
4. Once DisplayLink Core Software screen has disappeared Connect your USB Video
Adapter via the USB cable to your PC.
5. The system will initiate driver and software application (the DisplayLink Software
Configuration screen may flash or go black during the install).
Note: Some machines may require a system reboot for the USB Display Adapter
to initialize.
6. Connect the video cable from your VGA or HDMI display to the VGA (USB32VGAPRO) or
HDMI (USB32HDPRO) port on the USB Display Adapter.
The USB Video Adapter is now ready for use.
Mac OSX Installation
Note: Please ensure the software has been installed before the USB Display Adapter
is connected to your Mac (Installation steps below).
1. Insert the Driver CD (included) into the CD/DVD-ROM drive.
2. Browse through the Driver CD and locate the DisplayLink Installer file
(DisplayLink-OSX.dmg).
3. Double-click the DisplayLink Installer file (DisplayLink-OSX.dmg) to begin the
installation process.