StarTech.com ST121WHDST - Manual (Page 8)

Instruction Manual
5
Additional Operation
IR Remote Control
1 PWR Power On/Off
2 Menu Open on screen display
(OSD) menu
3 Exit Close OSD menu / Cancel
connection
4 Source Switch transmitters (If more
than one is connected)
5 Next Source Switch transmitters (to next
logical source if more than
one is connected)
6 Pre Source Switch transmitters (to
previous logical source if
more than one is connected
7 Move Cursor
8 OK Select OSD option
9 Delete Delete a Transmitter
10 Add Add a Transmitter
11 Guest Power On/Off
12 Input
Devices
Select to switch between
added Transmitters
NOTE: Before the remote control can operate, the battery protector must be removed
from the battery compartment. IR remote must be pointed at the receiver your display
is connected to.