Preparing your site – StarTech.com ST12MHDDC User Manual
Page 7
Instruction Manual
4
Preparing Your Site
1. Determine where the local video source (i.e. computer, Blu-ray Player) will be
located and set up the device.
2. Determine where the remote display(s) will be located and place/ mount the display
appropriately.
3. (Optional) If using ST12MHDDCRP Repeater unit(s) (sold separately), determine
where the remote display will be located in relation to the other displays and place/
mount the display(s) appropriately. Repeaters allow for an additional 330 ft. (100
meters) of Cat5/6 between each device. The repeater(s) must be situated between
the extender and the receiver, as the receiver does not have an RJ45 out port to
continue the chain.
NOTE: Ensure the Transmitter Unit, the Receiver Unit, and any Repeater Units are all
situated near an available AC electrical outlet. Make sure all devices are turned off
before beginning installation.