StarTech.com WIF2HDMC Quick Start - Manual (Page 7)

Instruction Manual
4
Firmware
For optimal operation we recommend updating your firmware to the latest version
(2.0.2). There are three possible firmware versions that may be loaded on your
WIFI2HDMC/WIFI2HDMCGE (1.6.5 / 2.0.0 / 2.0.2). Please follow the below steps to
identify your current firmware version, and update your firmware if required.
Identify Your Current Firmware Version
1. Follow Hardware Installation to display the primary launch page on your HDMI-
enabled display device.
Note: The primary launch page may vary depending on your firmware version.
2. Identify and take note of your firmware version.
a) If your WIFI2HDMC/WIFI2HDMCGE has firmware versions 1.6.5 or 2.0.0 installed,
your firmware version will be displayed in the bottom right-hand corner.
b) If your WIFI2HDMC/WIFI2HDMCGE has firmware version 2.0.2 installed, your
firmware version will be displayed on the secondary launch page. (Press the mode
select button once on the WIFI2HDMC/WIFI2HDCMGE to switch to the secondary
launch page).