StarTech.com IPUSB2VGAUE - Manual (Page 8)

Instruction Manual
5
Hardware Installation for USB
1. Connect the VGA display device to the Video Adapter and power on the Display
Device. If using the audio features, connect external speakers and/or a microphone
to the 3.5mm mini-jack connectors on the adapter.
2. Plug the power adapter into the VGA Video Adapter. The Power LED will light up steady.
3. Plug in the USB Video Adapter adapter to the computer with a standard mini USB to
USB cable. Windows should automatically start to load the drivers. Once complete,
you should see this icon in your System Tray:
4. To verify the installation, right-click on “My Computer” and select Manage to open
the Computer Management window.
5. In the left pane of the Computer Management window, click on Device Manager.
6. In the right pane of the Computer Management window, click on Universal Serial
Bus Controllers, and ensure that the USB Video Adapter is listed underneath. Under
the Sound category, will be a USB Sound device.
7. Additional (up to 4) VGA Video Adapters can now be connected to the computer
system. Each device will add additional entries to the Device Manager. Note that
only one audio device can be used by Windows at a time. So audio will only be
output to one of the VGA Video Adapters.
OPTIONAL: Connect any USB peripherals to be shared along with the VGA Video
Adapter, into the available USB hub ports on the unit. They will appear as directly
connected to the computer system.
Hardware Installation for Ethernet
1. Connect the VGA display device to the Video Adapter and power on the Display
Device. If using the audio features, connect external speakers and/or a microphone
to the 3.5mm mini-jack connectors on the adapter.
2. Connect the power adapter to the VGA Video Adapter. The Power LED will light
up steady.
3. Connect the RJ45 connector on the VGA Video Adapter to an available Ethernet
port on the network router/switch/hub, or directly to the computer system’s
Ethernet port.