StarTech.com ST122UTPAEU - Manual (Page 4)

Instruction Manual 1
Introduction
Packaging Contents
• 1 x VGA Video Extender Local Unit
• 1 x VGA Video Extender Remote Unit
• 1 x Mounting Bracket kit
• 2 x Power Adapters
• 1 x Instruction Manual
System Requirements
• VGA enabled video source and display device
• 3.5mm mini-jack enabled audio source and speaker
• Available power outlet at local and remote locations
• VGA male/female cable to connect video source to extender
• VGA male/male cable(s) to connect display devices to extender
Installation
NOTE: To prevent potential electrical damage to the units in some environments, ensure
that the chassis is properly grounded.
Hardware Installation
This product is composed of two different units: the Local Unit and the Remote Unit. The
Local Unit takes the output from an analog stereo audio and VGA video signal source
(usually a computer) and transmits it to the Remote Unit over Category 5 Ethernet cable.
The remote display(s) (monitor, projector, etc) and speaker(s) connect to the Remote
Unit using standard VGA and 3.5mm mini-jack connections respectively and displays the
image and audio from the local computer onto the remote display(s) and speaker(s).