StarTech.com ST121EXT - Manual (Page 4)

Instruction Manual 1
Introduction
The StarTech.com Converge A/V VGA over Cat5 Video Extender system is comprised
of a transmitter unit (ST1214T/ ST1218T) and a receiver unit (ST121R) and optionally a
repeater unit (ST121EXT). This video extender system allows you to split and extend a
single VGA source signal to up to four or eight separate remote locations. The VGA signal
is extended using standard Cat5 UTP cable, with a maximum distance of up to 150m
(492ft) or 250m (820ft) with a repeater.
Packaging Contents
• 1 x 4-port Transmitter Unit (ST1214T)
or
1 x 8-port Transmitter Unit (ST1218T)
or
1 x Receiver Unit (ST121R/ GB/ EU)
or
1 x Extender (Repeater) Unit (ST121EXT/ GB/ EU)
• 1 x Universal Power Adapter (ST1214T/ ST1218T only)
or
1 x Standard Power Adapter (NA or UK or EU plug)
• 1 x Mounting Bracket kit (ST121R/ GB/ EU and ST121EXT/ GB/ EU only)
• 1 x Instruction Manual
System Requirements
• VGA enabled video source and display
• Available power outlet at local and remote locations
• Both a Transmitter Unit and Receiver Unit(s)