StarTech.com USB3HDCAP - Manual (Page 8)

Instruction Manual
5
Hardware Installation
Note: Please ensure the Software Installation steps have been completed prior to
beginning Hardware Installation steps.
1. Using the included USB 3.0 cable, connect the USB3HDCAP to an available USB 3.0
port on your computer system.
2. Using the required video source cabling (not included) connect your video source
(DVD, DVR, VCR, Etc.) to the USB3HDCAP.
a. If your video source is Component, S-Video, or Composite, use the included A/V
breakout cable to connect your Audio/Video source cabling to the A/V breakout
cable input port on the USB3HDCAP. Please see Product Diagram on Page 1 for
reference.
USB3HDCAP
USB 3.0 Cable
Computer System
Video Source Device
Required Video
Source Cabling
USB3HDCAP