StarTech.com ST128HDMI2 - Manual (Page 7)

Instruction Manual
4
ST128HDMI2
Front View
(Optional ST124HDMI / ST128HDMI2) Locking Connection
Installation
Some models of the ST124HDMI2 and ST128HDMI2 include hex jack screws for each
HDMI port to include support for screw lock HDMI cables. If any of the HDMI cables in
your application support the screw locking feature, it is recommended that you install
the hex jack above the corresponding HDMI port.
Note: Some device models manufactured prior to May 2014 do not include hex
screws or the necessary hex screw mounting hardware.
Installation Instructions
Note: Before you begin installation please ensure your displays and the video
source device are turned off.
1. Connect an HDMI cable (not included) from each of the video display devices (e.g.
monitor, HDTV, Etc.) to the numbered output HDMI connectors on the video splitter.
NOTES:
• If you have installed the hex jack screw for a locking HDMI cable, please ensure
you lock the cable into place by screwing the thumb screw into the hex jack.
Power/Input Signal
LED
Output Signal LED
1~8