StarTech.com VS221HD2VGA - Manual (Page 6)

Instruction Manual
3
Mode Selection and Switch Operation
Change the Mode Selection Switch to choose your desired operation mode.
Instructions and descriptions for each Operation mode are listed below:
Manual Mode
Manual Mode enables you to switch between video sources with push button operation.
1. Set the Mode Selection Switch to “Manual Switch” to place the VS221HD2VGA into
Manual Mode.
2. Press the Input Selection Button to toggle between each Video Source Device. The
Active Port LED Indicator will light as video sources are switched, indicating which
port is selected.
Priority Mode
Priority Mode enables you to select a prioritized Video Input Device that
will automatically be selected should that device be turned on.
1. Set the Mode Selection Switch to “HDMI Priority” or “VGA Priority” to Place the
VS221HD2VGA into your choice Video Source Device priority.
2. Your HDMI or VGA Video Source Device (depending on your selection), will now
automatically be displayed on your VGA-enabled Video Display Device while it is
turned on. Turning off the device will automatically switch to the remaining device.
Set EDID Configuration
The VS221HD2VGA supports EDID pass-through, EDID copy and EDID emulation.
EDID is a communication structure used by your video display device to communicate
available display settings to your video source devices ensuring optimal performance.
You can set your desired EDID mode using the EDID dial on the side of the
VS221HD2VGA.