StarTech.com VS440HDMI - Manual (Page 9)

Instruction Manual
6
Options: Used to configure the serial port on the computer, if necessary.
Selecting Video Output
Mapping the “Output” ports to an “Input” port can be accomplished through one of
two methods
Method 1:
1. Ensure the “Video” checkbox is checked in the bottom right corner of the center panel.
2. Click on the appropriate location on the grid to map the numbered “Output” port to
a numbered “Input” port.
Method 2:
1. Ensure the “Video” checkbox is checked in the bottom right corner of the center panel.
2. Click on the numbered “Output” port button(s) along the side of the grid.
3. Click on the numbered “Input” port button along the bottom of the grid that you
want the previously selected outputs to use.
4. Press the “Deselect all output” button in the bottom left corner of the window.
NOTE: If the I/O port relationships are changed from the front panel controls directly,
the software will need to be refreshed using the “Scan” button.
Disconnect/Disable Video Output
To stop video from being sent to one or more of the Output ports:
1. Press the numbered button for the Output port(s) from the side of the grid.
2. Press the “Disconnect” button in the bottom right corner of the grid.
3. Press the “Deselect all output” button in the bottom left corner of the software window.
Saving/Loading Stored Profiles
The matrix switching software can store up to 4 different display relationship profiles.
To save the current configuration, select the desired profile number from the drop
down list and press the “Save” button. To load the currently selected profile, click the
“Load” button.