StarTech.com VS721MULTI - Manual (Page 7)

Instruction Manual
3
Hardware Installation
1. Connect the Desired Audio Video Input Cables (not included) from each video source
device (i.e. computer, Blu-ray Player) to the Video Input Ports (3 x HDMI®, 1 x VGA, 1x
Component YPbPr, 1 x Composite CVBS, 1 x S-Video) on the rear of the VS721MULTI.
2. Connect an HDMI® cable (not included) from the HDMI® enabled display device (i.e.
television, projector) to the HDMI® Output Port on the VS721MULTI.
3. Turn on the display device, followed by the video source devices.
4. (Optional) For RS232 Remote Serial control, connect the included RS232 Serial Cable
from a computer to the RS232 Serial port on the rear of the VS721MULTI.