StarTech.com CAB1631HDU - Manual (Page 13)

Instruction Manual
10
Left <CTRL> + left <CTRL> + <6> + <C>
Selects a computer connected to port C of a Slave connected to port 6 of the Master.
Auto Scan, automatically scans power-on computers one by one at a fixed interval:
Left <CTRL> + left <CTRL> + <F1>
When Auto Scan detects any keyboard or mouse activity, it suspends the scanning
till activity stops; it then resumes with the next computer in sequence. The length of
the Auto Scan interval (Scan Rate) is adjustable, see below. To abort the Auto Scan
mode, press the left <CTRL> key twice.
NOTE: Scan Type determines whether an eye-marked computer is to be displayed
during Auto Scan.
Manual Scan enables you to manually switch back and forth between power-on computers.
Left <CTRL> + left <CTRL> + <F2>
Press < > or < > to select the previous or the next computer in sequence. Press
any other key to abort the Manual Scan.
NOTE: Scan Type determines whether an eye-marked computer is to be displayed
during Auto Scan.
To adjust Scan Rate which sets the duration before switching to the next computer in
Auto Scan:
Left <CTRL> + left <CTRL> + <F3>
The Rack Console sends one to four beeps indicating scan interval of 3, 8, 15 and 30
seconds respectively.
To adjust keyboard Typematic Rate (characters/sec), this setting over-rides that of
BIOS and any operating system:
Left <CTRL> + left <CTRL> + <F4>
The Rack Console will generate 1 to 4 beeps corresponding to 10, 15, 20 and 30
characters/sec respectively.
Change Leading Hotkey
The default leading hotkey sequence involves pressing the left <CTRL> twice in
succession (e.g. left <CTRL>, left <CTRL>). This can be changed to the right <CTRL>
key instead, to avoid accidental activation due to using the left <CTRL> key for
functions such as Copy/Paste.