StarTech.com SV1641HDIE - Manual (Page 37)

Instruction Manual
32
OSD Function Keys
You can use the function keys when the OSD menu is active.
Function key <F1>
Edits the name of a managed computer or a Slave KVM. First, use the <UP> and
<DOWN> arrow keys to highlight a channel then press <F1> followed by name entry.
Your name can be up to 14 characters long. Valid characters are A to Z, 0 to 9, and the
dash character. Lowercase letters are converted to uppercase. Press <BACKSPACE>
to delete a letter one at a time. Nonvolatile memory stores all name entries until you
change, even if the unit is powered down.
Function key <F2>
Marks a computer to be scanned by switching the eye mark on or off. First, use the
<UP> and <DOWN> arrow keys to highlight the device, then press <F2> to switch its
eye mark on or off. If Scan Type is Ready PC + Eye (see Function key <F4>), only the
powered and eye-marked computers will be displayed in Scan mode.
Function key <F3>
Locks a device (a computer or a Slave) from unauthorized access. To lock a device, use
the <UP> and <DOWN> arrow keys to highlight it, then press <F3>. Now, enter up to
4 characters (A to Z, 0 to 9, dash) followed by <ENTER> as new password. A Security
enabled device is marked with a lock beside its channel number. To permanently
disable the security function from a locked device, highlight it, press <F3> then enter
the password. If you want to access the locked device temporarily, simply highlight it
and press <ENTER>. Enter the password and you can access the device. The device is
automatically re-locked once you switch to another device. During Scan mode, OSD
skips the security-enabled device.
Function key <F4>
More functions are available by hitting <F4>. A new screen pops up displaying the
functions described below. Most of them are marked with a triangle indicating there
are options to choose from. Using the <UP> and <DOWN> arrow keys, select the
function and press <ENTER>.
Available options will be shown in the middle of the screen. To select an option, use
the <UP> and <DOWN> arrow keys then press <ENTER> to select the options. You can
press <ESCAPE> to exit at any time.