StarTech.com SV3253DXI - Manual (Page 61)

Instruction Manual
56
2. Select your connections method or protocol (example: SSH, Telnet, Direct)
3. If you are choosing “Direct”, use the screens that follow to choose the
appropriate setting for your serially attached device. If you choose SSH
or Telnet, the following screen will ask you for the Host Name or IP
address of your remote connection:
4. Enter the specific port number used by the device to which you are
attempting to connect. Leave blank if you wish to use the standard port
numbers. (SSH = 22, Telnet = 23)