StarTech.com S358BU33ERM - Manual (Page 11)

Instruction Manual
8
ii. Using a Phillips head screw driver (not included), drive 4 of the 2.5” drive
screws through the bottom drive holes on the drive tray into the mount holes
on your HDD/SSD.
ii. Using a Phillips head screw driver (not included), drive 4 of the 3.5” drive
screws through the bottom drive holes on the drive tray into the mount holes
on your HDD.
b) If you are installing a 3.5” HDD
i. Line up the side facing drive mount holes on your HDD, with the side drive
holes on the drive tray.